A Cast Steel Steam Check Valve is used to protect industrial boilers and steam pipes by only allowing the steam to flow in one direction and automatically shutting off if the flow changes directions. Doing that simple thing keeps steam and condensate from returning to the boilers, pumps, and turbines. It reduces the risk of steam hammer, unstable pressure, and equipment damage. This valve is made by our company, FLA Industrial & Trading Co., Ltd., in carbon steel or stainless steel. It is available from DN50 to DN300 with flanged or threaded ends. This guide explains how the valve works, how to make sure it fits into your system, and what to check before you purchase.
| Model (DN) | Type | Connection | Pressure Rating | Temperature Range |
|---|---|---|---|---|
| DN50 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN50 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN50 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN65 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN65 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN65 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN80 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN80 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN80 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN100 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN100 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN100 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN125 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN125 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN125 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN150 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN150 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN150 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN200 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN200 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN200 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN250 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN250 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN250 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN300 | National Standard Medium Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN300 | National Standard Large Body | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
| DN300 | National Standard Heavy Body (Thickened) | Flanged/Threaded | PN16-PN40 | -20°C to 425°C |
You can travel fast with steam, and when it gets cold, you get condensate. If a pump or boiler trips, one side of a line can lose pressure. If no check valve is present, steam or hot condensate can flow back toward boilers, pumps, and turbines. Water hammer and condensate management are some of the common causes of pipe damage listed in the U.S. Department of Energy’s steam system sourcebook. That is why it is important to control the direction of the flow. This is something that boiler operators, EPC contractors, power plants, petrochemical facilities, distributors, and OEMs all say they are concerned about.” A good steam non-return valve also keeps cross-contamination between circuits to a minimum and maintains a more stable pressure across all connected devices.
A Cast Steel Steam Check Valve is a valve that permits the flow of steam and other hot fluids in one direction only. It opens when the upstream pressure is higher than the pressure on the downstream side and closes when the flow reverses. It doesn’t require a person to operate it or external power. Common types are swing, lift, and piston. The ends may be flanged, butt-welded, or socket-welded. Ours are flanged or threaded at the ends. WCB (ASTM A216) and other carbon steel castings are suitable for general high-temperature service. Acidic condensate is more likely to cause rust on steel. These valves are widely used in boilers, power plants, refineries, chemical plants, district heating systems, and industrial steam distribution.
The flow pressure pushes the disk away from the seat. When the flow is stopped, it returns by means of a spring, gravity, or both. The design of a swing uses a hinged disk, and it usually has a lower pressure drop. One type of lift design moves the disk up and down to control how it closes and seals, but makes flow more difficult. Main parts are the disk or piston, seat ring, hinge or guide, spring, gasket, and end connections. The body and the bonnet are of cast steel. The disk weight, spring force, flow speed, shape of the seat and its orientation influence the speed of closure, vibration and disk slam. Be careful with steam that pulses or moves fast, because a disk that closes slowly can shut with a bang when reverse flow builds up.
They are names for pressure classes, not pressures: Class 150, Class 300, Class 600. ASME B16.34 pressure-temperature ratings state that the pressure may drop with increasing temperature. When the temperature of the steam is high, a Class 300 valve will hold less pressure than when the temperature is normal. Our valve can handle steam temperatures up to 425°C. For your material, it is best to read the rating table at that exact temperature, not at room temperature. Thermal cycling, gasket selection, trim material, odd situations like a sudden pump trip- all those things are important too. Just give us your design pressure and max temperature, and our team will make sure it fits before you order.
When sourcing a Cast Steel Steam Check Valve, U.S. buyers usually look at a short list of standards. The ASME B16.34 standard is the one that deals with valve ratings and wall thickness. ASME B16.5 covers the sizes of flanges, and ASME B16.25 covers the ends of buttwelds. API 6D is for pipeline valves, and API 598 is for inspection and testing, such as shell and seat tests. ASTM A216 covers carbon steel castings for high-temperature service. Not all projects will need to follow all standards, so I recommend writing down the ones you need in your specification at inquiry time. Our product is CE marked, and our quality management system is certified according to ISO 9001. Before purchasing, you should know which standards a certain model meets.
A valve's real name is written on paper. I tell people who want to buy something to write down the valve size, pressure class, body and trim materials, face-to-face dimensions, test pressure, and any pressure-temperature limits. When your project calls for them, ask for material test certificates, inspection records, and certificates of conformity. Drawings and instructions for how to install things help maintenance teams and contractors plan the work. Distributors should also double-check the marking and packaging details, since mixed SKUs can make it take longer for warehouses to receive goods. If a supplier responds quickly to these requests, you can see right away how well it handles production and quality.
Cast Steel Steam Check Valves are put in place at the outflows of the boiler, the lines that carry feedwater and pump discharge, the main steam headers, the auxiliary steam circuits, the turbine bypass lines, and the process steam networks. It stops steam or condensate from going back toward a turbine in power plants. It keeps the upset of one unit from affecting the main steam line in refineries, petrochemical plants, and chemical plants. It is also used to stop backflow in district heating, steam tracing, pasteurization equipment, textile finishing, and heating in commercial buildings. Within the range of temperatures and ratings it offers, our valve can handle these tasks.
There isn't a single valve that can do everything. For corrosive condensate, you might need stainless steel or better materials. Seats and disks wear down faster when dirty steam is present. If there is a lot of pulsation or cycling quickly, you may need a spring-assisted or non-slam design. A project-specific engineering review is needed for vacuum service, two-phase flow, and pipes that are oriented in strange ways. Size is also important. If the flow is slow, an over-sized valve may leave the disk partly open, which can lead to chatter and wear. Before I ship a valve that doesn't fit the line, I'd rather help you make sure the operating data is correct.
Cast steel is a cheap material that can be used for many industrial tasks, as it is easy to find, has a wide range of uses, and works well with high-temperature steam. Cast bodies are heavier than wafer or forged designs, and swing types can slam the disk if the flow isn’t right. Cast steel is preferred for larger pipe sizes, and forged steel for smaller high-pressure lines. Cast iron cannot be used with steam at as high temperatures or pressures as cast steel. Rusts carbon steel where stainless steel is used. Designs – Swing valves lose less pressure than lift valves, which close guided but fight flow more.
I show people how to do four things. Before you do anything else, you need to describe the medium, pressure, temperature, flow rate, velocity, pressure differential, cycling frequency, and pipe orientation. In the second step, choose the type of design: swing, lift, spring-assisted, or non-slam. Third, check the materials used for the body and trim, the pressure class at the working temperature, and the type of connection. Fourth, check the standards, measurements, testing, certificates, spare parts, lead time, and support from the supplier. Our valve has body sizes that range from medium to heavy (thickened), so you can choose the wall strength that fits your safety margin. The quote cycle is cut down by half when the engineering, procurement, quality, and operations teams all use the same checklist.
Before installing a Cast Steel Steam Check Valve, check the model, size, pressure grade, flow arrow, orientation, and inspection status. Make sure the pipe is clean, straight, and free of undue mechanical stress. Unless otherwise stated by the manufacturer, swing types should be installed in horizontal lines. Lift or spring-assisted models also must go in the allowed flow direction. When commissioning, add steam slowly. Too much steam at once can cause steam hammer. Then check for leaks, monitor the vibrations, and compare the pressure drop with the planned values. A short note of these readings gives maintenance teams a benchmark to compare with later.
“Schedule inspections to coincide with plant outages. Inspect the seats, disks, hinges, springs, and gaskets for damage such as wear, corrosion, and erosion. Disk slam is indicated by hammering sounds, pitted seating surfaces, and worn hinge pins. Every time you open the hood, change the gaskets, and keep spare parts for important lines on the shelf. Inspection times must be shortened when dirt or wetness reduces steam quality. Write down every finding. The wear patterns may be pointing to a problem with the size or orientation of the valve rather than with the valve itself.
A quote is based on a number of things, such as the size, pressure class, body and trim material, valve design, connection type, need for inspection and certification, quantity, packaging, and delivery location. Send a datasheet with the medium, pressure, temperature, flow direction, standards, quantity, destination, Incoterms, and documentation needs to get a correct answer. When it comes to private labeling, packaging, minimum order quantities, production capacity, and early pre-shipment inspection, distributors and OEMs should step up their game. Quote changes and delivery delays can be avoided with clear inputs. That is important for contractors who are working to meet project deadlines and for purchasing managers who are planning what to buy.
Use evidence to judge a supplier. Find out about the company's manufacturing experience, controls for casting and machining, the ability to trace materials, quality certification, the ability to export, technical support, and the availability of spare parts. Over 1,000 different types of hardware tools, Woodworking Clamps, electrical line tools, and malleable iron pipe fittings have been made by FLA Industrial & Trading Co., Ltd. for almost 40 years. The United States, Germany, and Australia are some of the markets we serve. Some of the Fortune Global 500 companies are also our partners. Ask for pictures of the factory, test certificates, and written references, and make sure that every claim is true before you buy.
Our Cast Steel Steam Check Valve is cast, machined, assembled, and finally painted. Before casting, we test each batch of raw materials to ensure they meet the requirements. In addition, our controlled casting process ensures uniform wall thickness. Computer control of machining holds sealing surfaces and connecting dimensions to very close tolerances. Each valve is hydrostatically tested to ensure the valve can hold its rated pressure without leaking. We also test the flow characteristics and sealing performance under conditions that are similar to what they would be used for in real life. Experienced technicians do visual and size checks before packing items. The ISO 9001 certification proves that our quality management system meets international standards, and the CE marking proves that our Products" target="_blank" style="color:blue" >products meet European safety standards. These records are proof that engineers and purchasing managers can check.
This cast steel steam check valve prevents reverse flow automatically to protect boilers, pumps, turbines, and steam pipelines. This reduces steam hammer and pressure changes. The allowable pressure decreases as the heat increases. So the correct answer depends on how well the design, materials, and pressure class fit the actual operating temperature. Buyers can be assured of quality through standards such as ASME B16.34 and API 598, test records, and listing of materials. Cast steel has good bodies and is easy to find, but weight and disk slam in swing applications that aren't right for them mean you need to be careful when choosing. Engineers have to deal with corrosive, dirty, pulsating, vacuum, or two-phase conditions. Proper installation and gradual commissioning, as well as regular inspection, increase the service life. A complete datasheet and a verified supplier will ensure accurate procurement.
It depends on the pressure, temperature, speed, direction, the maximum pressure drop, and the need for closure. Most of the time, lift- or spring-assisted types work best for cycling or pulsation, while swing types work best for steady horizontal flow. Send your operating data so that we can check it technically.
Sure, as long as the design and rating are right for the job. These are pressure classes, not operating pressures. As temperature rises, allowable pressure drops. WCB carbon steel is good for a lot of general industrial steam services.
Orientation is based on how it was made. If not told otherwise, swing valves usually go in horizontal lines, and lift valves follow the flow direction given by the manufacturer. Delivery time and customization choices depend on the size, material, and quantity, so please send us your needs to get a firm estimate.
Looking for a company that makes Cast Steel Steam Check Valves and can answer your technical questions in a clear way? Send FLA Industrial & Trading Co., Ltd. an email at sales@flaindustrial.com with your size, quantity, medium, pressure, temperature, flow direction, connection type, standards, destination, and paperwork needs. We will suggest a type of valve, a material, and a connection. Then we will send you a quote, technical documents, and an estimate of when the valve will be delivered. For more information about the product, go to flaindustry.com.
1. ASME B16.34: Valves – Flanged, Threaded, and Welding End, American Society of Mechanical Engineers, 2020
2. API Standard 598: Valve Inspection and Testing, American Petroleum Institute, 2016
3. ASME B16.5: Pipe Flanges and Flanged Fittings, American Society of Mechanical Engineers, 2020
4. Improving Steam System Performance: A Sourcebook for Industry, U.S. Department of Energy, 2012
5. ASTM A216/A216M: Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding for High-Temperature Service, ASTM International, 2021
6. Valve Handbook, Philip L. Skousen, McGraw-Hill, 2011
YOU MAY LIKE