A Grooved Equal Tee provides a simple way to quickly split or merge flow at a 90-degree branch without welding when all three pipes are the same nominal size. The ductile iron fitting has grooved couplings and gaskets to join the pipe ends, so crews don’t have to thread or do hot work on it. It can be used for cross mains, branch lines and retrofit projects if the buyer confirms the outside diameter, groove dimensions, pressure rating and UL or FM approval for the exact product. NFPA 13 governs sprinkler installation in the U.S., so it’s important to ensure they’re approved. This guide is for distributors, contractors and purchasing teams who want the facts before they place an order.
| Nominal Diameter (mm) | Pipe Fitting Outer Diameter D (mm) | Nominal Pressure (MPa) | Basic Outline Dimension L (mm) |
|---|---|---|---|
| 32 | 42.4 | 2.5 | 60 |
| 40 | 48.7 | 2.5 | 60 |
| 50 | 57 | 2.5 | 70 |
| 50 | 60.3 | 2.5 | 70 |
| 65 | 76.1 | 2.5 | 76 |
| 80 | 88.9 | 2.5 | 85 |
| 100 | 108 | 2.5 | 95 |
| 100 | 114.3 | 2.5 | 95 |
| 125 | 133 | 2.5 | 110 |
| 125 | 139.7 | 2.5 | 110 |
| 150 | 159 | 2.5 | 120 |
| 150 | 165 | 2.5 | 120 |
| 150 | 168.3 | 2.5 | 120 |
| 200 | 219.1 | 1.6 | 165 |
| 250 | 273 | 1.6 | 215 |
| 300 | 323.9 | 1.6 | 230 |
| 350 | 377 | 1.6 | 280 |
When all the pipes connected have the same nominal size, a Grooved Equal Tee, a three-outlet fitting, makes a 90-degree branch. There is a groove on each end that fits into a coupling housing, and a gasket keeps the joint closed. There's no need to weld or thread. A lot of people mistake it for a reducing tee, which has a smaller branch outlet. Before placing an order, I tell people to look at five things: the nominal size, the actual outside diameter, the groove dimensions, the pressure rating, and the product approvals. Just because a tee looks good on paper doesn't mean it will pass an inspection. The groove profile or listing must match the pipe and coupling in the project.
This fitting works with cross mains, sprinkler branch lines, HVAC water circuits, and other building-service pipes. It's often used in warehouses, offices, factories, shopping malls, logistics centers, and public buildings because it's easy for workers to get to the joints and it's quick and easy to put together. Since there is no open flame in an occupied building, projects like renovations, additions, moves, and limited hot work benefit the most. According to NFPA research on U.S. sprinkler performance, sprinklers work in most fires that are big enough to set them off, so each fitting in the branch path is important. It still depends on the standard, the service medium, the pressure, the temperature, the gasket material, and the service medium.
Every job needs a different fit. Some projects need a different type of connection, like threads on small pipes or flanges on equipment. If the water is acidic, there may be chemicals or temperatures that aren't normal that need a different material or gasket grade. Standard water gaskets may break down in steam and hot service, so you need gaskets that are rated for those temperatures. Before you choose a fitting, you should write down the service medium and temperature range. If the project specification calls for a certain list of materials or listing, you must use that, even if a similar product looks the same. A quick review at the beginning keeps you from having to redo work later, and it also protects the approval path with insurers and inspectors.
have approved drawings, correct pipe lengths and a safe way to shut down the system. Inspect the check tee, gasket, housings, bolts and nuts for damage. Cut the pipe in a square, prepare the end, check the size of the groove and the condition of the pipe end. Put the gasket where the manufacturer says, line up the tee, mate the housings and evenly tighten the bolts . Then check bolt pads, alignment, gasket position and how well the housing fits together. The required pressure test shall be conducted by qualified persons. NFPA 13 says 200 psi for two hours most of the time, or 50 psi above the maximum static pressure when the static pressure is more than 150 psi. Keep test records, inspection results and batch information until handover time.
Size tells you nothing about a Grooved Equal Tee. Check outside diameter, center to end, branch and groove profile measurements, as well as installation clearance and coupling compatibility. ANSI/AWWA C606 is often referenced for groove specs, but manufacturers’ sizes vary, so a size table is useful for teams comparing different product lines. The tee, coupling, gasket and pipe are all part of the joint, so the pressure and temperature ratings are for the whole caboodle. Fire protection of a water-based type is often made from ductile iron. ASTM A536 Grade 65-45-12 requires minimum tensile strength of 65,000 psi, minimum yield strength of 45,000 psi and minimum elongation of 12%. If required by the project documents, stainless steel may be able to handle corrosive conditions.
What I tell people who buy my Products" target="_blank" style="color:blue" >products are these main facts:.
Material and finish: The tee is cast and machined from ductile iron in China, and it ships with a red painted or galvanized finish. Choose the coating that matches the humidity and exposure at the installation site, and confirm it against the project specification before you place a purchase order.
Size and pressure: Nominal diameters run from 32mm to 350mm, and the fitting carries a pressure rating of up to 2.5 MPa. Remember that the complete joint also depends on the coupling, gasket, and pipe, so verify the rating of the full assembly against your design pressure and listing data.
Certifications: Our products and manufacturing processes hold ISO9001, CE, and UL/FM certifications. Because approvals attach to specific product series, sizes, and configurations, ask us for current certificates that match your exact order, and compare them with the requirements of your inspector, consultant, or insurer. We help match documents to each project.
These details make it easy for contractors and distributors to quickly compare our fitting to a specification sheet.
When it comes to fire safety, paperwork is almost as important as the casting. In the United States, NFPA 13 sets the rules for installing sprinkler systems and only allows parts that are listed or approved. When it comes to fire safety, UL 213 covers rubber gasketed fittings, and FM Approvals has its own certification program. ASTM standards talk about things like A536 for ductile iron castings. This approval is specific to a manufacturer, product line, size range, pressure rating, and configuration, so it can't be confirmed by a general catalog line. Ask for up-to-date quality records, installation instructions, certificates, and datasheets. Final approval is based on the project requirements, local building codes, insurance companies, consultants, and the governing body.
Read the product data before purchasing or installing the product. The complete technical package typically includes the datasheet, dimensional drawing, pressure and temperature rating, information on materials and coatings, details of gasket and coupling compatibility, installation instructions, approval certificates, quality records, packing information and traceability data. Engineers, contractors, consultants, insurers and the government may perform review duties. At item delivery, the incoming inspection shall verify size, markings, coating condition, packaging and batch numbers against the submittal. NFPA 25 also includes checks, tests and upkeep for water-based systems, so owners can have consistent records when they need like replacement parts years later.
The first part of our Grooved Equal Tee production process involves important checks. Before production, we test the chemical composition and mechanical properties of incoming ductile iron. Each fitting is then carefully checked for groove size, outlet spacing and overall shape. Random samples from each production batch are hydrostatically tested to verify pressure ratings. Our team also checks the thickness and adhesion of the coating to make sure it will not rust over time. All products are visually and dimensionally checked before packing. Our quality management system is based on ISO 9001 to ensure consistent production. These steps provide buyers with a clear paper trail and make incoming inspection less of a surprise.
Every method is good for something. Most of the time, grooved tees are easier and quicker to assemble than welded joints. Threaded tees can still be used for smaller pipes or some configurations. Flanged tees work well for connecting pieces of equipment or locations where things need to be disassembled often. A mechanical tee is employed to connect a branch to an existing main via a drilled hole. But an equal tee is used between two prepared pipe ends. The type of coupling is also a factor. Rigid couplings hold pipes in place while flexible couplings allow movement. This changes the vibration behavior, thermal expansion, seismic design and pipe supports. Check the system designer and manufacturer's instructions to ensure you choose the right coupling and hanger spacing.
Go through the options in the right order. First, you need to know what kind of system you have, the service medium, the pipe sizes, the branch orientation, the installation environment, and whether you need an equal or reducing tee. Next, check the outside diameter, groove profile, compatibility of the coupling and gasket, clearances, and the pressure and temperature requirements. Match the finish to the level of humidity, chemicals, water quality, coastal exposure, or being buried. Last, look at the supplier's ability to make the product, their quality control measures, their ability to be tracked, their approval documents, their experience exporting, and their technical support. You should ask for plans, certificates, samples, and records of inspections. Then buyers and engineers can be sure that the product will work together, and there will be fewer problems on the job site.
Teams keep making the same mistakes. They choose a t-shirt based only on its nominal size, think that all grooved products are fire-safe, mix parts from different manufacturers, or don't check the temperature and chemical compatibility of the gasket. Leaks happen on the job site because of worn grooves, using the wrong lubricant, unevenly tightening bolts, bad alignment, and not testing. Another common reason for leaks right after installation is a gasket that got pinched while the housing was being tightened. Every mistake can cause extra work, failed approvals, or early maintenance calls. Design teams should also leave room for future branch growth, access, isolation, and replacement. Follow the latest instructions from the manufacturer and check the whole assembly, not just the tee.
Buying things online is faster, but the unit cost is not the whole story. The total is based on size, material, coating, pressure rating, certification, quantity, packaging, freight, duties, currency and where you want it delivered to. A user-friendly RFQ covers things like sizes, quantities, uses, approvals, coatings, pressure and temperature, destination, Incoterms, delivery date and any OEM or private label needs. To compare offers fairly, ask suppliers to break down the cost of the product, the tools, the certification and the shipping. For sprinkler work that needs to be done in a hurry, obtain written confirmation of the actual stock, production capacity, inspection time and shipping schedule.
Before you issue the purchase order, take one last look. The technical details are the equal branch configuration, the pipe outside diameter, the compatibility of the groove and coupling, the pressure and temperature ratings, the material, the coating and the space needed for installation. Some documents are needed to prove that the product meets some standards, for example UL, FM or ASTM. For commercial items, there is a full price list, confirmed stock, lead time, delivery terms, packaging and ability to supply in the future. Some of the long-term things are being able to track them, getting technical help, being able to install them, making sure they work with replacements and making sure the sizes are the same from batch to batch. The buyer, looking at these four groupings, finds most problems before they are shipped, when they are cheaper to fix.
FLA Industrial & Trading Co., Ltd. has been producing over 1,000 kinds of hardware tools, Woodworking Clamps, electrical line tools and malleable iron pipe fittings for nearly 40 years. In the US, Germany and Australia people purchase from us and our products are trusted by Forbes Global 500 companies. Standard items are stocked at 2,000 tons and custom orders ship out in 7-15 days. We will contact you with pricing, pressure specifications and 3D designs within 24 to 48 hours. Before we start producing, our technical team checks the design and parameters. We can also produce custom shaped parts – precisely to your specifications. We can support any order size from small batch to high volume supply programs.
Best results come from matching every detail to the project. A Grooved Equal Tee gives sprinkler designers a same-size, 90-degree branch that can be assembled without welding or threading. Size alone is not enough. The outside diameter, groove profile, material, finish, pressure rating and the quality of the coupling and gasket fit all affect the joint. UL and FM approvals must be specific to the product line in question. NFPA 13 testing and full records are required to support acceptance. The grooved tee is the preferred choice for retrofit and limited hot work jobs over the welded, threaded, flanged and mechanical options, but there are times when a different method is required. Good RFQs, documentation review and incoming inspection can reduce leaks, rework and approval delays.
It creates a 90 degree branch of the same size between the pipe ends. The tee, coupling and gasket can be used by crews in sprinkler, HVAC, water and industrial systems when they carry the required approvals. First, always double-check the listing.
Between two ready-made pipe ends is an equal tee. A mechanical tee connects a branch to a main line through a hole that has been drilled. Pick based on grid and project rules.
They check that the grooves are the correct size, install the gasket with lubricant, torque the bolts evenly, and perform the pressure test that was requested of them. Qualified persons should retain the test records until they are passed over.
Write down the sizes, quantities, uses, approvals, finish, pressure and temperature, where the goods are going, Incoterms, the date of delivery, and any OEM needs. What kind of fire protection works depends on the product, the coupling, the gasket, the status of the approval, the local rules, and the qualified installation.
Are you planning a sprinkler project and need a Grooved Equal Tee manufacturer who can get back to you quickly? FLA Industrial & Trading Co., Ltd. has standard stock of ductile iron fittings and can also make custom parts in any shape. These fittings are certified by ISO9001, CE, and UL/FM. Send an email to sales@flaindustrial.com with the sizes, quantities, finish, and delivery address you want. We will get back to you within 24–48 hours. For more information, go to flaindustry.com.
1. NFPA 13: Standard for the Installation of Sprinkler Systems, 2022
2. NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, 2023
3. ASTM A536: Standard Specification for Ductile Iron Castings, 2019
4. ANSI/AWWA C606: Grooved and Shouldered Joints, 2022
5. NFPA Research, U.S. Experience with Sprinklers, 2021
6. ISO 9001: Quality Management Systems — Requirements, 2015
YOU MAY LIKE